RT-600 Multi-Band Direction Finder System for Airborne SAR

Category:

Description

The RT-600 (SAR-DF 517) is an SAR direction finder system for airborne SAR that operates on all frequency bands used for rescue missions, including emergency frequencies 121.500 MHz, 243.000 MHz and 406.028 MHz Cospas-Sarsat as well as channel 16 of the marine band. Emergency beacons that operate on the Cospas-Sarsat frequency 406.028 MHz can be identified and localized. No additional equipment is required in the aircraft since the electronic direction finding components are integrated into the antenna. The display and control unit consists of an 80-mm round instrument, and the graphic LCD display permits convenient viewing of localization and Cospas-Sarsat information.

Special Features

• Universal SAR direction finder: VHF aviation and marine band, UHF aviation band, Cospas-Sarsat frequency
• High reception sensitivity to permit detection of extremely weak or distant signals
• High direction finder accuracy, precise and stable display
• Optimized for use on board aircraft: compact display and control unit with LCD display

Technical Data

Method of bearing Doppler-principle (3kHz rotational frequency)
Bearing accuracy ≤ 5° (RMS)
Internal resolution
Frequency stability ±2.0 ppm
Receiving channels 8 (four of them are free adjustable)
Frequency range SAR VHF Airband : 118.000 to 124.000 MHz
VHF Marine Band: 154.000 to 163.000 MHz
UHF Air Band: 240.000 to 246.000 MHz
COSPAS-SARSAT: 400.000 to 406.092 MHz
UHF FM-Band: 406.100 to 410.000 MHz
Scanning mode When receiving Cospas/Sarsat signals, the emergency frequencies 121,500 MHz and 243,000 MHz may be surveilled simultaneously.
Cospas/Sarsat analysis Reception and analysis/decoding of Cospas/Sarsat data signal (112 resp. 144 bit, 400 baud, biphase L-phase modulated, with Bose-Chaudhuri-Hocquenghem error test / specified according Cospas/Sarsat C/S T.001 October 1999)
Bearable modulation types A3E, F3E, A3X (ELT-modulation); bearing mostly independent of modulation
Polarisation Vertical
Error of polarisation ≤ 5° at 60° field vector rotation
Garbling cone app. 30° to the vertical
Response Time ≤ 50 ms typ
LC-graphic display 128×64 dots, supertwist /transflective, extended range of temperature, dark-blue display on yellow-green background, lit up.
Free adjustable (exponentiell) dimming of brightness
Supply voltage range 12 V to 35 V DC
Current consumption LCD-background lighting Off: max. 350 mA (12 V DC) / 200 mA (24 V DC)
LCD-background lighting 100%: max. 600 mA (12 V DC) / 300 mA (24 V DC)
Interface Remote Control: RS-232
Legend Dimming: Analogue 1,5 to 28 V
Night Status Line: Discrete, low-active
NVG Status Line: Discrete, low-active
ARINC 429: on request
Serial interface RS232 (9600 baud, 8 databits, 1 stoppbit, no parity)
Operating temperature DCU: -20°to +55°C / Short time +60°C
AU: -40°to +60°C
Protection system DCU: non
AU: IP 67
Weights DCU: 250 g
AU: 2000 g
Dimensions DCU: 82mm x 82mm x 43mm (width x height x depth)
AU: ∅270mm x 185mm
Frequency range LE VHF Airband: 118.000 to 124.000 MHz
VHF Marine Band: 154.000 to 163.000 MHz
LoJack: 164.000 to 174.000 MHz
ETS: 216.000 to 220.000 MHz
COSPAS-SARSAT: 400.000 to 406.092 MHz
Bearing sensitivity VHF Air Band ≤ 6 µV/m / 4 µV/m typical at ±5° bearing fluctuation
Bearing sensitivity VHF Marine Band ≤ 5 µV/m / 2,5 µV/m typisch at ±5° bearing fluctuation
Bearing sensitivity LoJack ≤ 5 µV/m / 2 µV/m typisch at ±5° bearing fluctuation
Bearing sensitivity ETS ≤ 6 µV/m / 4 µV/m typical at ±5° bearing fluctuation
Bearing sensitivity COSPAS-SARSAT ≤ 15 µV/m / 8 µV/m typical at ±5° bearing fluctuation
Bearing sensitivity UHF FM-Band ≤ 15 µV/m / 6 µV/m typical
Storage temperature DCU: -30°C to +80°C
AU: -55°C to +80°C
Bearing sensitivity UHF Airband ≤ 10 µV/m / 6 µV/m typical at ±5° bearing fluctuation

Accessories

RAMP Tester

Full width rt 600 ramp tester frei

The RT-600 ramp tester is a measuring device that enables a rapid functional test of the RT-600. It consists of the antenna measurement device and an optional RF signal generator, which allows the testing of arbitrary frequencies within the RT-600 frequency range. The ramp tester can be easily attached to the RT-600 AU and allows a functional test in 45 ° increments. It offers a comprehensive performance test of the DF system mounted on the aircraft, including DF accuracy, bearing sensitivity and audiomodulation test.

Frequency options RT-600 A

Full width rt 600 a hp ready

F1 VHF-Airband: 118.000 to 136.992 MHz
F2 VHF-Marineband: 137.000 to 224.995 MHz
F3 UHF-Airband: 225.000 to 399.975 MHz
F4 UHF-FM Band: 406.100 to 470.000 MHz

The Optional Frequency extensions can be ordered seperatly to extend the frequency range of each system individually.

NVIS Display

Full width rt 600 dcu nvis freixcf

The NVIS display variant of the RT-600 is designed for night use and meets the color spectrum requirements that are required for the use of night vision equipment.

Frequency options RT-600 LE

Full width rt 600 le hp ready 2

F1 VHF-Airband: 118.000 to 136.992 MHz
F2 VHF-Marineband: 137.000 to 163.000 MHz

The Optional Frequency extensions can be ordered seperatly to extend the frequency range of each system individually.